Plasmaskærer, Powermat PM-PCUT-50G

---

Plasmaskærer, Powermat PM-PCUT-50G

Gratis levering kan evt. aftales i næsten hele Nord- og Midtjylland

Jeg har sat et 32A kraftstik på, men det kan nemt laves om til 220V igen.

Næsten ikke brugt

Klar til brug! Det eneste du skal bruge er en god kompressor!

Se youtube-video her:
https://www.youtube.com/watch?v=ahD2UOH4Ve0

Plasma cutter enables the cutting of electrically conductive materials such as non-alloy steels, alloys, steel, aluminum, copper, nickel or iron. The cutting current is very stable, which guarantees high cutting quality. In addition, the cutter is equipped with HF (high frequency ignition) arc ignition mode - it defines the concept of contactless arc ignition using high frequency, which allows you to create a starting point. The supplied shoulder strap increases the scope of work, eg at heights. The device is cooled by a fan at high speed. The thermal switch disconnects the device if the permissible operating cycle for the welding current is exceeded, it prevents the machine from overheating.

Technical parameters:
-Voltage: 230V / 50Hz
- No-load voltage: 240 V
- Input power: 4.8 kVA
- Ignition type: HF (contactless)
- Cutting depth max .: 16 mm
- Depth qualitative cut: 8 mm
- Current range: 15 - 50A
- Duty cycle at 100%: 38.5A
- Duty cycle at 60%: 50A
- Nominal duty cycle: 60%
- Air pressure: 4-5 bar
- Compressed air flow: approx. 100 l / min
- Insulation class: H
- Degree of protection: IP21S
- Cable length (230 V): 130 cm
- Earth cable length: 200 cm
- Torch length: 400 cm
- Weight: 8.2 kg
- Dimensions WxHxD: 155mm x 285 mm x 43